Menu
Your Cart

Taga TTA-1000B

Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B
Taga TTA-1000B

A solid tube amplifier in the higher league, when analog sound is at its best. With a weight class of 24kg, you understand that this is a serious build, it has been equipped with very exquisite components and conveys quality right through.

  • 2x60w (4ohm) from 4x KT88 tubes working in Push-pull
  • Built-in RIAA stage so you can play your favorites from vinyl players
  • A sturdy, pure aluminum remote control for easy operation
  • RCA output for connecting separate power amps or subwoofers
  • Bluetooth 4.0
NEW FEATURES (compared to the TTA-1000)
High performance PSVANE KT88*, ECC83 and 6SN7 vacuum tubes from the Classic series to ensure the best performance - a very warm, linear and natural sound with high dynamic presentation at the same time.
KT88 tubes in the final stage (with fixed mains load) and an ECC83 tube preamplifier section, assembled by the 6SN7 long-tail phase inversion drive circuit.
* KT120 ready
Bluetooth® - to wirelessly stream music from smartphones, tablets or computers

OTHER KEY FEATURES
  • Sleek aluminum front panel design to suit most interiors.
  • Class A amplification to provide the best linearity, signal gain, efficiency and power output.
  • Audiophile-grade coupling capacitors: Evox for input tubes and Wima for connecting drive tubes with the output amplifier, and Rubycon capacitors in the amplifier section.
  • High quality toroidal EI broadband audio transformer provides voltage stability and constant and instantly available energy at all volume levels.
  • Independent rectifier and filter circuits in the supply voltage for both channels.
  • The ALPS audiophile volume potentiometer ensures minimal noise and channel crosstalk and has excellent operational sensitivity, limiting errors between the two channels.
  • Ceramic tube sleeves with gold-plated contacts to get the most out of the tubes.
  • 3 analog inputs with advanced RCA sockets in solid machined brass including a turntable input (both MM and MC cassettes) to enjoy music from vinyl records.
  • Gold-plated speaker terminals that accept speaker cables up to 6mm2 as well as banana and spade connectors.
  • Preamplifier output for an optional external power amplifier or powered subwoofer and speakers.
  • Detachable Schuko-IEC C13 power cable provides the ability to upgrade the system with a premium audiophile power cable at any time.
  • Aluminum remote control .
  • The TTA-1000B sound is very linear, warm, natural and fresh with a deep multi-dimensional soundstage and high dynamics.
  • Enjoy analog sound at its best - Enjoy the TTA-1000B!




SPECIFICATIONS
  • Design: Vacuum tube amplifier with Push-pull Class A
  • Tube: PSvane Classic Series, 4 x KT88, 2 x 6SN7, 1 x ECC83
  • Power: 2 x 30W 8ohm, 2 x 60W 4ohm
  • Bluetooth: v4.0
  • Analog Inputs: 2x RCA + Phono (MM/MC)
  • Analog outputs: RCA Pre-Out
  • Frequency range: 10Hz-30KHz (±1dB)
  • Noise ratio: ≥89db
  • Features: Manual bias adjustment
  • Accessories: Aluminum remote control, Protective cage for vacuum tubes, Removable Schuko-IEC C13 power cord
  • Power consumption: 400W (230-240V)
  • Measurements (HxWxD): 22.5 x 45 x 37.5 cm
  • Weight: 24kg
  • Color: Black

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.

We use cookies to improve your browsing experience and the functionality of our site.