Menu
Your Cart

DEMO - Aune S17 Pro

DEMO - Aune S17 Pro
DEMO - Aune S17 Pro
DEMO - Aune S17 Pro
DEMO - Aune S17 Pro
DEMO - Aune S17 Pro
DEMO - Aune S17 Pro
New -11 %
DEMO - Aune S17 Pro
DEMO - Aune S17 Pro
DEMO - Aune S17 Pro
DEMO - Aune S17 Pro
DEMO - Aune S17 Pro
DEMO - Aune S17 Pro

As Aune's new generation of fully discrete Class A headphone amplifiers, the S17 Pro has the power and sound quality. 2 current levels to choose from (50mA/100mA class A idle current), with maximum output power as high as 7.5W.

The S17 Pro has a 50W Toroidal Transformer with a low noise floor + 19200μF large capacitor bank that offers a proper power reserve.

It is a high-performance headphone amplifier with nice sound and high output power.


Pairs well with the Aune S10N Music Streamer with built-in Saber 9038Q2M DAC.



Class A headphone amplifier

3 connections for headphones

Discrete components

Completely symmetrical structure

R2R volume control

50 Watt linear toroidal transformer

Aluminum remote control


Twin JFETs provide a tube-like sound.

JFET has high input impedance and full and smooth sound reminiscent of a tube amplifier.

As for the S17 Pro, it's not just a JFET. They are dual JFETs, whose temperature rises are the same, the performance is the same, and the midpoint voltage is stable. It is the ideal input transistor for an audiophile headphone amplifier.


Two gain levels

Push your headphones and IEMs to their full potential.

The S17 Pro has two levels of amplification. The low gain takes advantage of the class-A amplifier's feature that the transistors always work in the linear range, to drive the IEMs well and properly, while the high gain is as high as 7.5W and thus can drive demanding headphones.


Complex radiator structure

The class-A amplifier's transistors create a lot of heat and a complex three-dimensional structure has been created where the heatsink on the transistor + the heating plate at the bottom + chassis form a complete cooling system.


Aluminum multifunction button and remote control

The front of the S17 Pro is clean and simple, and with the one multifunction knob you can adjust power, gain and volume.

The well-designed all-aluminium remote control makes control even easier.


Multi connection

S17 Pro has 3 headphone outputs, 2 groups of preamplifier outputs and 2 line inputs, satisfying your needs in different scenarios.


Input/Output Impedance:

RCA input: 10KΩ

RCA pre-stage output: 200Ω

XLR input: 22KΩ

XLR preamp output: 100Ω

XLR/6.35/4.4 headphone output: 1Ω


Single-Ended 6.35mm Headphone Output:

Frequency range (20Hz~80KHz) ± 0.05dB

THD+N > 0.00038% @ 1KHz

SNR > 115dB @ 600Ω

Crosstalk < -105dB @ 1KHz 600Ω


Balanced XLR Headphone Output:

Frequency range (20Hz~80KHz) ± 0.05dB

THD+N > 0.00016% @ 1KHz

SNR > 116dB @ 600Ω

Crosstalk < -110dB @ 1KHz 600Ω


G-L Low Gain Single-Ended Output:

32Ω = 738mW

100Ω = 250mW

150Ω = 166mW

250Ω = 100mW

300Ω = 83mW

470Ω = 53mW

600Ω = 41mW


G-L low gain balanced output:

32Ω = 2773mW

100Ω = 968mW

150Ω = 645mW

250Ω = 388mW

300Ω = 333mW

470Ω = 212mW

600Ω = 166mW


G-H High Gain Single-Ended Output:

32Ω = 2020mW

100Ω = 675mW

150Ω = 453mW

250Ω = 273mW

300Ω = 228mW

470Ω = 145mW

600Ω = 114mW


G-H high gain balanced output:

32Ω = 7507mW

100Ω = 2643mW

150Ω = 1793mW

250Ω = 1089mW

300Ω = 908mW

470Ω = 580mW

600Ω = 453mW

Write a review

Note: HTML is not translated!
Bad Good



Buy&Try applies to the entire Aune, Auralic, Quadral, Sbooster & Taga range.

Buy & try gives you as a customer the opportunity to try out the product in your own home environment, instead of standing in a stressful store and trying to form an opinion. Rooms behave very differently and affect the sound in different ways and we give you the opportunity to demo the product for a full 30 days, in your own home.

 

If for some reason you feel dissatisfied, just contact us and we will help you with the return shipping, you can also take advantage of our shipping agreements with lower prices. Costs that will be charged to the customer are the shipping to the customer and the return shipping to us at MYC HiFi. For return approval, the item must be returned in new condition and in the original packaging.

 

Regarding speakers, be aware that speakers may need a long recording time to come into their own. After a couple of hours you can usually get a taste of what to expect, but a speaker deserves 100h+ before serious listening. The speakers we sell with ribbon tweeters need several hundred hours before they start to sing. So feel free to leave the speakers on around the clock so you can quickly accumulate hours.

 

If you have any questions or concerns, do not hesitate to contact us.

 

 

  • Buy & Try applies to goods that are normally kept in stock and not to order goods, unless otherwise agreed.

We provide at least a 2-year warranty on all products, some products have up to a 5-year warranty. With this, you avoid expensive insurances and can feel safe as a customer. In case of problems during the warranty period, contact us and we will solve it quickly and smoothly.


Aune: 2 years

Denon: 2 years

Marantz: 2 years

NuPrime: 2 years

Sbooster: 2 years

Taga Harmony: Passive speakers 5 years

Take Harmony Electronics: 2 years

Take Harmony Cables: 5 years

Quadral: Passive speakers 5 years

Xindak: Cables 5 years


Other products see the manufacturer's warranty.


ATTENTION!

The 2-year warranty does not apply to headphones, demo/service copies or consumables, in these cases the manufacturer's warranty applies. On demo and service copies, the warranty period is stated on the product page.

Lamp warranty

If the lamp for your projector breaks during the first 12 months, or the first 1000 hours (whichever comes first), you will receive a new lamp free of charge. If the manufacturer has a more generous warranty, it applies.

We use cookies to improve your browsing experience and the functionality of our site.